Flip Deck - pocket clamshell cyberdeck for Pimoroni Badgeware + Qw/ST Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flip-phone style cyberdeck: your Badgeware badge in the lid, the Qw/ST Pad in the base, one print-in-place hinge.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Open Community License v1.1 + General Attribution v1
Open it up and it is a tiny handheld computer: the badge is the screen, the Qw/ST Pad is the keyboard. Snap it shut and the screen is protected in your pocket.
Fits Badgeware Tufty 2350, Badger 2350 and Blinky 2350 (built around Pimoroni's Badgeware Blank)
The badge slides in from the top and is locked by two small snap-in keepers, no tools or screws
Screen, all 5 front buttons, the USB-C port and the reset/home buttons stay free
Print-in-place hinge with cone pivots, opens flat to 180 degrees and stops there
Two corner clips keep it closed
Pocket for the Qw/ST Pad in Pimoroni's own printable pad case, plus a storage slot for the Multi-Sensor Stick
Cable channel in the base and a groove on the back for a 200 mm Qw/ST cable
Not tested yet - designed and checked in CAD (badge, keepers, pad and the full hinge travel checked for fit and clearance).