1 / 6
Frost Grip – Freezable Can Holder (Ice Jacket + Knurled Handle) — zdjęcie 1
1 / 6

Frost Grip – Freezable Can Holder (Ice Jacket + Knurled Handle)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Freeze it and keep your can cold for longer. Hollow ice jacket + knurled handle, screw-on fill cap, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Standard Digital File License

Keep your can ice cold! The Frost Grip has a hollow wall around the can and a hollow knurled handle. Fill it with water through the cap, freeze it, and the ice shell keeps your drink cold for much longer.

Heavily inspired by the Freeze Holder by Laban on MakerWorld. Remade from scratch with a new screw-on fill cap, and published with Laban's permission. Thank you Laban!

Features

  • Fits standard 33 cl and 50 cl cans (66 mm)

  • Hollow ice jacket around the can + hollow handle

  • Diamond-knurled grip – comfortable even when frozen

  • Screw-on fill cap with a water drop + snowflake symbol

  • Prints in one piece without supports (all inside roofs are 45°)

  • Optional TPU washer for an extra tight seal

How to use

  1. Unscrew the cap and fill with water to about 85 % (ice needs room to expand – don't fill it to the top!)

  2. Screw the cap on tight

  3. Put it in the freezer for about 3–4 hours (or overnight)

  4. Put your can in and enjoy a cold drink

Tip: add a pinch of salt (about 1 teaspoon per ~120 ml water) to make the ice even colder. Up to 1 tablespoon still freezes solid in a normal freezer (−18 to −23 °C).

Print settings

  • PLA (PETG works too), 0.2 mm layers, 3 walls (important for a watertight print), 15 % infill, no supports

  • Holder upside down (rim on the plate), cap top-face down – as in the 3MF

  • About 3 h 24 min and 134 g on a Bambu Lab A1 (0.4 mm nozzle)

Files

  • Frost Grip - A1.3mf – ready-to-print Bambu plate (holder + cap)

  • frost_mug.3mf – holder only

  • frost_cap.stl – fill cap

  • frost_gasket.stl – optional TPU washer for the cap

Notes

  • Hand wash only – not dishwasher safe, and not for the microwave

  • Test for leaks before the first freeze: fill with water, close the cap and hold it upside down over the sink

Tagi