Dart holder 4 sets standing with drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Darts holder for 4 sets of darts. I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one…
- Ocena
- 4,667 / 5
- Polubienia
- 71
- Pobrania
- 789
- Wydruki
- 9
- Wyświetlenia
- 3078
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Darts holder for 4 sets of darts.
I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one set of darts as well as the mounting holes.
I added 2 foots so it can stand easily on a flat surface.
You can find it here: https://www.thingiverse.com/thing:4745360
But as I imported the original model into Fusion the surfaces were bad and i was told that a drawer for the dart tips is missing, so i recreated the stand based on the original design.
The drawer runs very smooth with my print settings and doues not touch the ground.
I uploaded also the fusion file for you to modify later if necessary.
Please use 10 % scaling in Cura and turn on the flat back-side of the model to achieve best bed adhesion and use minimal support structures.
If you like my work and want to support it you can do it here:
https://paypal.me/sebastiandruckt 
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament: Geeetech PLA Black
Notes:
I used support at angles above 70°
Category: Sport & Outdoors