Mini CORE One – Coralboard Case (Synaptics Coralboard SL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CORE One–inspired case for the Synaptics Coralboard: all ports accessible, clip-in board, room for wiring and a fan.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Mini CORE One – a printer-shaped home for your Coralboard
This enclosure turns the Synaptics Coralboard into a miniature Prusa CORE One. It protects the board, keeps every important connector reachable, and leaves plenty of free space inside the "printer" for your own wiring, a small fan, sensors or other add-ons. Use it as a desk demo piece for on-device AI, or as a solid base for your next project.
4 printed parts
Board base (orange): holds the Coralboard and carries all the port cut-outs.
Main body (black): the printer frame with a vented top. It fits onto the base.
Door window: the CORE One front door glass. Print it in transparent PETG or any colour you like.
Display: the small front LCD. Print it in light grey or white.
Features
All ports accessible: the dual USB-A, the USB-C, the microSD slot and the GPIO header all stay reachable with the case closed. The two on-board buttons can be pressed through small holes.
Tool-free mounting: the board sits on four standoffs and is locked in place by small internal clips. No screws, no inserts and no glue are needed for the board.
Room to build: the hollow "printer" body above the board leaves space for cable routing, a small fan, a camera or a display project.
Designed from the official reference CAD published by Coral on Printables, so the mounting holes and connector positions match the real board.
Hardware
None required. Use glue only to fix the window and the display permanently.
Print settings (recommended)
Layer height 0.2 mm, 3 perimeters, 15–20 % infill
PLA or PETG (PETG is recommended if the board runs warm for long periods)
Print each part in its flattest orientation. The 3MF contains all four parts ready to plate.
Assembly
Press the Coralboard into the orange base until the internal clips lock it.
Fit the window and the display into the main body.
Put the black body onto the base.
Files included
STL files for every part, plus a 3MF with all four parts.
STEP file of the original design (case parts only), so you can remix it: add vents, a camera mount, a fan duct and more.
Note about the pictures
The green PCB shown in the renders is for illustration only. It comes from the official reference CAD, because I don't have a physical Coralboard yet, so the fit was designed from the reference model. The photos show the real printed case. Feedback and makes are very welcome!
Made for the Printables "CoralBoard™ Cases & Mounts" contest. Prusa CORE One is a trademark of Prusa Research; this design is a fan-made homage.