1 / 3
40:1 Print-in-Place Planetary Crank Gearbox / Demonstration Model — zdjęcie 1
1 / 3

40:1 Print-in-Place Planetary Crank Gearbox / Demonstration Model

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 40:1 hand-crank functional gearbox that prints in one piece, already assembled: no supports, no screws, no bearings.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Apache License 2.0

Turn the crank and the dial ring creeps round once for every 40 turns, one tick per turn. It's a split-ring planetary gearbox: two planetary stages share three long planet gears. The bottom stage rolls the planets round a fixed ring, and the top stage meshes them with a dial ring that has a few more teeth. Those few teeth are what give the big reduction.

All the gears are herringbone, so they run smoothly and stay in line. An open cage holds the planets on their axles, so you can watch them turn.

Prints in place, without supports. Nothing prints over a gap on a flat face. The dial ring sits on a 45° cone, the gear teeth start with 45° chamfers, the cage's lid rises at 45° from its pins, and the dial starts as a row of small points that grow outwards.

Size: about 95 mm across and 47 mm tall, with three screw holes in the flange for mounting.

After printing: hold the base and work the crank back and forth until it turns freely. If the dial sticks, give it a twist against the base to break it free.

Designed in ScottiCAD, a free, open-source CAD program, as a script you can change: the gap, the tooth counts, or a knob instead of a crank. Get ScottiCAD, with its example designs, at https://scotticad.com

Tagi