Solar Shield UV Glasses Side Replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For when they crack
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
by @CriptasticHacker
https://cripsrise.neocities.org/
Please leave a ♥ if this helps you :)
Printed in PLA with tree supports (Orcaslicer on a Creality Hi)
Might be worth changing the support angle to cover the entire model, so it will be less rough on the edge
If you have access to a multi-nozzle printer, using PLA+PETG for smoother support finish is also nice.
I sanded mine down with a rotary tool for a smoother finish on the ends. Otherwise it's a bit rough to feel.
Also thinking of trying some of the rubber liquid tip stuff later for a nicer rubbery tip.
But they work totally good enough for now!