Nozzle base compatible with Shark NEO and NEO+ and 38 mm vacuum storage bag nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixable nozzle base for Shark NEO and NEO+, plus a 38 mm nozzle that presses onto clothing vacuum storage bag valves.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A nozzle base for the Shark NEO and NEO+, plus an example nozzle for clothing vacuum storage bags (space saver bags).
The base is a connector that fits the NEO and NEO+. The fit has been verified on the actual vacuum. Use this as a starting point and add your own nozzle ideas.
The ID38mm file is a nozzle for clothing vacuum storage bags, with a 38 mm inner diameter. Press the tip against the bag’s round valve to suck the air out.
Shark vacuums are great, but they often cannot use generic nozzles, which is why I made this. This is an unofficial accessory and is not affiliated with SharkNinja.
The vacuum may temporarily stop due to its own protection feature when airflow is blocked, for example while pressing against a bag valve. This is normal; wait a moment and it should start again.