Nezuko Bamboo for Cosplay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mask version of Nezuko Bamboo for cosplay or prop use. Two print options, both with ready-to-print files.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mask version of Nezuko Kamado's bamboo from the anime Demon Slayer. A friend wanted the bamboo prop for cosplay, but we didn't like the designs and builds we found online, so I designed one based on the anime proportions.
Fits over the mouth so you can breathe and talk normally (unlike the "bit" versions that you have to hold between your teeth) and looks good if just dangling around the neck. And hollow so it's light.
Two versions are included:
One-Piece Whole Version: This will print standing up on one end with minimal supports needed for the lower end for printing the ribbon hole. The upper end is designed so that the slicer will be able to print a "floating hole" without extra internal supports. THIS END MUST BE FACING UP when setting up the slicer. Note that on the printed model, the ends will look different on the outside: the upper one will print smooth, while the lower one will have a slight texture due to printing the flat face on supports (which is still flatter than bridging the whole face).
Two-Piece Half Version: This version needs two copies which are then glued together. Holes for alignment pins are included (I just used cut bamboo skewers). Incorporates 45-degree ribs to ease with bridging. Will need support for the arches on the end and mouth opening. I've included this version for those who want the outer faces on the ends to be smooth for painting or whatnot.
Both versions have a ready-to-print .3mf with custom brim and supports already set up, which can be edited or deleted as needed.
These files use custom brims from youtuber Slicer Underground. I won't go into detail here about how to adjust them as it's quite complex, but you can watch the following video if you'd like to know more. But IMO, this is invaluable tools and knowledge that needs to be passed on so I'm promoting it here.