1 / 26
AURORA - Northern Lights Night Light with Name — zdjęcie 1
1 / 26

AURORA - Northern Lights Night Light with Name

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4-colour winter village shadow-box lamp with your name in yellow. Slide-in panels, no supports, LED tealight.

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

A winter night light for the shelf, the kids' room or the Christmas table. Four printed panels stand one behind the other in a slotted box: an icicle arch with a snowman, a little village with glowing yellow windows, a pine forest with Santa's sleigh crossing the moon, and a purple sky lit by a turquoise aurora and 55 star holes. An LED tealight glows behind them and every layer becomes part of one scene. Your name sits above the arch in yellow.

Highlights

  • Real colour light: Colour areas are full-thickness inlays, not paint: light shines through yellow windows, a turquoise aurora and a purple sky.

  • Your name on top: Type any name in the customizer and pick one of 5 fonts. Long names shrink to fit.

  • 4 colours or all white: Two ready Bambu Studio projects: a 4-colour AMS version and a one-spool white version where the windows open up and the aurora glows through thin layers.

  • Very few colour changes: Colours are grouped by plate. The whole 4-colour lamp needs only 6 colour changes.

  • Slides together, no glue: Rails in the base and in both side walls hold every panel straight; the lid locks the top. About 5 minutes to assemble.

  • No supports: Every part prints flat. The panels print front face down for a clean, smooth front.

What you need

  • PLA in white, yellow, turquoise and purple for the 4-colour version (about 185 g, mostly white). Or about 174 g of white PLA for the white version.

  • One 1.5" (38 mm) LED tealight in COOL WHITE. Warm-white light makes the turquoise and purple look dark. A model with a remote is recommended, because the tealight sits inside the lamp.

  • LED tealights only. Never use a real flame.

Files

  • AURORA_4colour_0.4.3mf: 4-colour project (Bambu Lab X2D, 0.4 nozzle), 5 plates, about 5 h and 185 g.

  • AURORA_white_0.4.3mf: one-colour project, 3 plates, about 4 h 25 min and 174 g.

  • STL files: every part in print orientation. Colour parts of one panel share the same origin: load them together as one object and assign the colours. The white-version panels are in AURORA_STL_white.zip.

  • AURORA.scad: customizer. Install the fonts from AURORA_fonts.zip, then set name, font and version in OpenSCAD.

  • AURORA_Assembly_Guide.pdf and README.txt.

Print settings

0.4 mm nozzle, 0.20 mm layers, 3 walls, 15 % infill, PLA, no supports. Panels print front face down. Fits any 256 x 256 mm bed.

Customizer

Open AURORA.scad in OpenSCAD (install the fonts from AURORA_fonts.zip first) or use the Customize button on MakerWorld.

  • Name: Any name, up to about 12 letters. Long names are scaled down to fit the band above the arch.

  • Font: Rounded (Fredoka), Script (Pacifico), Retro script (Lobster), Festive (Mountains of Christmas), Clean (Poppins).

  • Version: 4 colours (yellow name inlay) or all white (the name glows through a thin layer).

  • Part: Export the front panel with your name, or any other panel or plate.

  • Tealight cup: 38 to 44 mm. The default 40.8 mm fits standard 38-39 mm LED tealights.

Assembly

  1. Switch the tealight on and drop it into the cup at the back of the base.

  2. Press both side walls into the long slots of the base, rails facing inwards.

  3. Slide the panels down the wall rails from back to front: rear, aurora sky, forest, village, front. Smooth side to the front.

  4. Press the lid on with the star vents over the tealight.

Tips

  • Use a cool-white LED tealight: it keeps the turquoise and purple bright.

  • Turn off elephant-foot compensation or keep it small. The rails have 0.15 mm clearance per side.

  • A panel feels tight? Two strokes of 400-grit sandpaper on its side edges.

  • Only have one colour? Print the white version: same box, same rails, glowing windows.

If you print one, please post a Make with a photo of yours lit up: it helps a lot. Merry Christmas!

NEW - Bambu Lab H3C: AURORA_4colour_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09: 4.5 h, 192 g (5 plates).

Tagi