1 / 6
Creality SpacePi SE 1KG Spool Spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer designed for the Creality SpacePi SE dryer. It helps stop a 1KG spool from jamming when the filament gets low.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a simple spacer to fit in this particular dryer. When the filament would get low and the spool gets light, it would get pulled sideways and jam, causing my prints to fail. The spacer does not impede the spool rotation.
I printed it in ABS but PETG should be fine. This box only goes up to 65C.
