Voronoi Lattice Face Mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modified from a 3D scan of my face!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Started as an actual 3D scan of my own face. I cut it down to a low-poly solid in Blender/MeshLab, then ran a simple modifier stack: Subdivision > Wireframe > Subdivision . The second subdivide is what rounds the straight wireframe struts into the soft organic cells, and every vertex from the low-poly base ends up as the center of one of the little flower clusters. So it’s not actually Voronoi, it just looks like it.
Screenshots are in stack order (low-poly, subdivided, wireframe, final) so you can see each step. The .blend is included if you want to remix it. To get a different pattern density, change the low-poly vert count before anything else. Wireframe thickness is 2 mm.
Lattice was printed in grey resin, came out with really clean struts even around the nose and lips. Supports go on the inside/concave side so the face side stays clean. The struts are pretty fine, so be gentle pulling it off the plate and during cleanup.
Also threw in the low-poly base as its own STL - prints great on FDM, the one in the pics is white PLA off my Prusa, no fancy settings needed. The lattice really wants resin though, the struts are way too fine for a 0.4 nozzle.
Works as a desk piece, wall hanger, or a lamp shade if you put a light behind it - Voronoi shadows are cool.