4.8L Small Form Factor PC Case - Console Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully printed custom PC case that is 4.8L, and can be printed on an A1 (256mm x 256m x 256mm).
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is designed to fit the following parts:
Motherboard: ASRock B650I Lightning Wifi Mini-ITX
Cooler: Thermalright AXP90-x36
GPU: ASUS Pheonix GeForce RTX 3060 12GB
PSU: Apevia 500W Flex-ATX
Hardware needed:
M3 Heat-Set Inserts: https://www.amazon.ca/dp/B0CS6VZYL8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
M3 Screws: https://www.amazon.ca/dp/B0FP4CGQ9J?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
PSU Extension cable: https://www.aliexpress.com/item/1005007295578022.html?spm=a2g0o.order_list.order_list_main.14.10151802uiKtCp
GPU Riser Card: https://www.aliexpress.com/item/1005006057004647.html?spm=a2g0o.order_list.order_list_main.29.10151802uiKtCp
90 Degree GPU power cable: https://www.aliexpress.com/item/1005009328003501.html?spm=a2g0o.order_list.order_list_main.19.10151802uiKtCp
Push Button: https://www.amazon.ca/dp/B07F9PF8MP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
Additional Notes:
Printed on a BambuLab A1
PLA risks warping under high heat. Use high-temp filaments
Longer GPUs could technically fit within the case's volume, but some support geometry would need to change.
Once Assembled, the case looks like this:


Modifications Needed:
Remove the following parts of the motherboard I/O shroud (I used a grinder):

Remove the GPU's fan shroud, and front plate.
Remove this edge of the GPU's backplate:

Will likely need to make a shorter 24pin power cable. The stock one that comes with the Apevia PSU is much too long:
