Two-Colour Topo Tile (Filament Swap, Single Extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
80 x 80 mm topographic tile in two colours using one filament swap at Z = 5.2 mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
An 80 x 80 mm tile with a topographic relief, printed in two colours on any single-extruder printer with ONE filament change. Files: topo_tile_single_colour_for_filament_swap.stl (use with a colour change at Z = 5.2 mm); topo_tile_2_colour.3mf plus the two separate part STLs (dark base, light peaks) for multi-material printers; topo_swap_list.txt with the swap heights. PRINT SETTINGS: layer height 0.2 mm, first layer 0.2 mm, 9 mm total height, 3 perimeters, 15% infill. Colour 1 up to 5.0 mm. Insert a colour change before layer 26 (Z = 5.20 mm). In PrusaSlicer or Orca: right-click the layer slider and choose Add colour change. In Cura: Pause at height plus change filament. No supports. Material: PLA. All parts were checked watertight. The pictures are Blender renders, not photos of a print. Made with Color Layer Splitter for Blender: https://superhivemarket.com/products/color-layer-splitter