AL80 Hose Organizer (Bungee Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bungee-mounted organizer that keeps up to 6 hoses routed along an AL80 cylinder. PETG, exact CAD.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hose organizer for an AL80 cylinder (Ø184 mm). Keeps up to 6 hoses neatly routed along the tank: Ø13 mm channels, three on each side of a central window.
Mounts on the cylinder with a 6 mm bungee loop through built-in tunnels; the knots sit inside the center window
- Height 60 mm, 5.04 mm walls, rounded lips (R2) so hoses snap in and out easily
- Single color, PETG
Print settings: Bambu Lab P2S, 0.4 nozzle, 0.16 mm layers, PETG, 2 walls, 15% gyroid, 255 °C / 70 °C textured PEI. All walls are multiples of the 0.42 mm line width; the model is exact CAD with real fillets. The 3MF is a ready Bambu Studio project.
Note: the photos show my personal prints with my name raised on the front. The files are clean, with no lettering, so you can add your own name or leave it plain.
Also on MakerWorld: https://makerworld.com/en/models/3568714