Orcatorch Torch Holders D710 / D520 / SD01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on webbing holders for Orcatorch D710, D520 and SD01 dive torches. PETG remix of BoroTools' holder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snap-on holders for Orcatorch dive torches: D710 (Ø27.0), D520 (Ø23.9) and SD01 (Ø19). The holder threads onto the harness webbing (e.g. the shoulder strap) and keeps the torch upright, ready to grab with one hand.
225° wrap (SD01: 220°), bore = torch Ø − 0.22 mm for a firm snap fit, no rattle
- 3 mm webbing slot with three staggered ribs so the holder doesn't wander
- 10 mm wide, 4.2 mm jaws, small lips on the jaw tips
- Raised model label (D710 / D520 / SD01) in a second color
- Print-tested in PETG: snaps on perfectly
Files: 3MF with all three holders on one plate (2 colors, Bambu Studio project) and STEP of each holder.
Print settings: Bambu Lab P2S, 0.4 nozzle, 0.16 mm layers, PETG, 2 walls, 15% gyroid, 255 °C / 70 °C textured PEI. Label printed in a second color via AMS.
Remix of "dive torch holder" by BoroTools (MakerWorld, CC BY-NC-SA). Also on MakerWorld: https://makerworld.com/en/models/3568820