Dust cover for NUMARK TTX II turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust and impact protection made of 5 PETG components bonded together using a two-component epoxy adhesive.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll find explanations in french on my website : https://labidulerie.vicou.be/couvercle-pour-platine-numark-iix-en-impression-3d/
The lid consists of 5 components, which I have named as follows (viewed from above):
Le coin inférieur droit
Le coin supérieur droit
Le coin supérieur gauche
Le coin supérieur gauche
Le coin du bras
The two rounded components on the left side are identical but mirrored.
I designed everything in FreeCAD; you can find the files by clicking the link below. The source files will allow you to modify the parts as you wish.
I printed it with a thickness of 1.6 mm. Consequently, using my 0.4 mm nozzle—with two perimeters and 4 layers on each side—there is no infill. The top reinforcements are 2 mm thick; I decided to set their infill to 100%. There is no advantage to doing otherwise.