1 / 2
Sparkling water bottle bottom
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement bottom part for Wassermax / AGA Aqvia bottles. Should fit snuggly and not need any adhesive.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A replacement bottom part for Wassermax / AGA Aqvia sparkling water bottles. Should fit snuggly and not need any adhesive.
Print in PETG using supports for the inner ring. Use 100% infill, since the part is 1,2mm thick, using 2 perimters inside/outside will result in a solid part.