1 / 3
Bedside E-Reader Dock - USB-C Charging Channel + Page-Turner Remote Pocket — zdjęcie 1
1 / 3

Bedside E-Reader Dock - USB-C Charging Channel + Page-Turner Remote Pocket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bedside dock for 6 and 7 inch e-readers: 18° lean, USB-C cable channel, remote pocket, glasses groove.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Bedside e-reader dock by M2Labs for 6-inch and 7-inch e-readers. The reader leans back 18 degrees in a slot with a rounded front lip, so you can read hands-free at night, and it can charge while docked: a USB-C plug pocket under the slot leads to a 12 mm cable channel that exits at the back (a slim straight or right-angle USB-C plug is recommended).

A side pocket holds a clip-on Bluetooth page-turner remote (fits clickers of about 45x30x15 mm), and a groove in front of the lip parks your reading glasses. The hollow, open-bottom base can take coins or steel washers for extra weight.

Two versions: 6in (slot for devices about 117 mm wide, dock 129x105x105 mm) and 7in (slot for devices about 127 mm wide, dock 139x105x105 mm). The slot is 8.6 mm thick (8.0 mm device + 0.6 mm clearance), so it is meant for a bare device, not one in a folio cover. Please check your device's width and thickness before printing.

Print settings: 0.2 mm layers, 15% gyroid infill, 3 walls, no supports, PLA or PETG, prints standing on its base. Two colours: main body (oat / sand or charcoal) + debossed 'READ' inlay (terracotta / copper). The 3MF files have both parts aligned for multi-colour printing; a single-colour print also works.

Files: base + accent STL and a 3MF for each size. About 136 g filament and roughly 11 h in total (estimate).

The images are 3D renders, not photos of a printed part. Generic design; not affiliated with any e-reader brand.

Tagi