Walbro Carb Metering Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed based on mfg specs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed based on mfg specs. Sized similiarily to commercial gauges. The lettering will not turn out well if printed with 0.4 nozzle. But will work fine if print out the included screenshot. 0.2 nozzle recommended if you care about the lettering.
This gauge was also designed as a go no go gauge for WLA carb. The WLA carb gauge tolerance is betweeen 1.2 to 1.59. The WLA side was designed to 1.2. and the bottom tip sticks out 1.59. This works because a carb like WGA only requires the metering lever to be flush to surrounding surface.
Please leave a like and a make if you have found this useful. Thanks!