1 / 3
Bedside E-Reader Dock with Charging Channel & Page-Turner Remote Slot — zdjęcie 1
1 / 3

Bedside E-Reader Dock with Charging Channel & Page-Turner Remote Slot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tilted bedside dock for 6 and 7 inch e-readers: charges while docked, holds a page-turner remote and glasses.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Bedside e-reader dock by M2Labs for 6-inch and 7-inch e-readers. The reader leans back 18 degrees in a slot with a rounded front lip, so you can read hands-free at night, and it charges while docked: a USB-C plug pocket under the slot leads to a 12 mm cable channel that exits at the back (a slim straight or right-angle USB-C plug is recommended).

A side pocket holds a clip-on wireless page-turner remote (fits about 45 x 30 x 15 mm clickers), and a groove in front of the lip parks your reading glasses. The hollow open-bottom base can take coins or steel washers for extra weight.

Two versions: 6in (129 x 105 x 105 mm, for readers about 117 mm wide) and 7in (139 x 105 x 105 mm, for readers about 127 mm wide). The slot is 8.6 mm wide (8.0 mm device + 0.6 mm clearance) and open at the ends, so the reader can overhang a few mm on each side. Check your device thickness before printing; a reader in a thick folio cover will not fit.

Two colours: main body (oat / sand or charcoal matte PLA) + a debossed READ inlay (terracotta / copper). The 3MF files have both parts aligned; a single-colour print also works.

Print settings: 0.2 mm layers, 15% gyroid infill, 3 walls, no supports, PLA or PETG, prints standing on its base. About 136 g of filament and about 11 h (estimate).

The images are 3D renders, not photos of a print.

Tagi