Target Patch Dispenser V2 / Schusspflasterspender V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Over-engineered contraption to house a roll of target patches, doubles as a dispenser (for patches inside the spool)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Did this a while ago because I was annoyed with the carton box my target patches came in.
Attention, this one is for spools with patches on the inside of the film (see lower part)
One coil spring Ø8x25 is required.
For assembly please refer to the cross section view.
Depending on your device's tolerances, some adjustments may be necessary.
1) Insert the pin into the lower, followed by the spring.
2) Compress the spring and secure it in place with the screw plug.
3) Insert the upper into the corresponding slots, pressing down on the pin.
4) Rotate the upper into final position, the pin should come up and secure it.
For disassembly, use a screwdriver or key to push down the pin and rotate the upper according to the symbols.