Rennbahn-Deko für Carrera GO!!! & Sturmkind DR!FT 1:43/1:87 – Leitplanke, Reifenstapel, Betonwand, Curb, Pylonen / Race track decoration set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Streckendeko-Set mit Leitplanke, Reifenstapel, Betonleitwand und Curb als Gerade und 90°-Kurve, dazu Pylonen
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
Mach aus deiner Rennbahn eine echte Rennstrecke: Dieses Set säumt die Fahrbahn mit allem, was an einen Rennkurs gehört – Leitplanke, Reifenstapel, rot-weiße Betonleitwand und Curbs, dazu Pylonen für Schikanen und Drift-Parcours. In 1:43 (Carrera GO!!!, Sturmkind DR!FT, Slotcar) und 1:87 (H0).
Ausstattung
• Leitplanke mit zwei Planken auf Pfosten
• Reifenstapel aus vier Lagen, abwechselnd schwarz und weiß
• Betonleitwand, Elemente abwechselnd rot und weiß
• Curb mit rot-weißen Streifen
• Jedes Streckenteil als Gerade (12 m Vorbild) und als 90°-Kurve (10 m Radius)
• Einheitliches Stecksystem: Alle Streckenteile haben an beiden Enden dieselbe Tasche im Sockel und werden mit einem Schwalbenschwanz-Clip verbunden – jedes Ende passt an jedes Ende, so lassen sich Leitplanke, Reifenstapel und Betonwand frei kombinieren
• 12 Pylonen (orange mit weißen Bändern) und eine Platte mit 10 Clips
• Dunkelgrauer Sockel unter allen Streckenteilen
Größe
• 1:43: Gerade ca. 28 cm (2 Segmente à 14 cm), Kurve ca. 37 cm Bogenlänge (2 Segmente à 45°), Radius 23 cm; Höhe Leitplanke 2,8 cm, Reifenstapel 2,1 cm, Betonwand 2,2 cm, Curb 2,3 cm breit; Pylone ca. 1,2 cm hoch
• 1:87: Gerade ca. 14 cm, Kurve ca. 18 cm Bogenlänge (ein Teil), Radius 11,5 cm; Höhe Leitplanke 1,5 cm, Reifenstapel 1,2 cm, Betonwand 1,2 cm, Curb 1,5 cm breit; Pylone ca. 0,6 cm hoch
Lieferumfang: STL- und mehrfarbige 3MF-Dateien aller Teile in 1:43 und 1:87, Farblisten, LIESMICH und Ansichten. Die OpenSCAD-Quelldatei ist nicht enthalten.
Hinweis / Disclaimer: Carrera, Carrera GO!!!, Carrera Hybrid und Sturmkind DR!FT sind Marken ihrer jeweiligen Inhaber. Dieses Modell ist unabhängiges Deko-Zubehör und steht in keiner Verbindung zu den Markeninhabern; die Namen beschreiben nur den passenden Maßstab und Einsatzzweck. Das Set ist eine freie Nachbildung typischer Streckenausstattung und kein lizenziertes Produkt eines Herstellers. Kein Spielzeug – enthält Kleinteile, nicht für Kinder unter 3 Jahren. Lizenz: nur für den privaten Gebrauch; Weiterverkauf oder Weitergabe der Dateien sowie Verkauf gedruckter Teile ist nicht gestattet.
--- English ---
Turn your track into a real circuit: this set lines the road with everything a race track needs – guardrail, tyre wall, red-and-white concrete barrier and kerbs, plus traffic cones for chicanes and drift courses. In 1:43 (Carrera GO!!!, Sturmkind DR!FT, slot cars) and 1:87 (H0).
Features
• Guardrail with two rails on posts
• Tyre wall of four layers, alternating black and white
• Concrete barrier, elements alternating red and white
• Kerb with red-and-white stripes
• Every track piece as a straight (12 m real length) and a 90° curve (10 m radius)
• One plug system: all track pieces have the same pocket at both ends of the base and are joined with a dovetail clip – any end fits any end, so guardrail, tyre wall and concrete barrier can be combined freely
• 12 traffic cones (orange with white bands) and a plate of 10 clips
• Dark grey base under all track pieces
Size
• 1:43: straight approx. 28 cm (2 segments of 14 cm), curve approx. 37 cm arc length (2 segments of 45°), radius 23 cm; height guardrail 2.8 cm, tyre wall 2.1 cm, concrete barrier 2.2 cm, kerb 2.3 cm wide; cone approx. 1.2 cm high
• 1:87: straight approx. 14 cm, curve approx. 18 cm arc length (one piece), radius 11.5 cm; height guardrail 1.5 cm, tyre wall 1.2 cm, concrete barrier 1.2 cm, kerb 1.5 cm wide; cone approx. 0.6 cm high
Included: STL and multicolour 3MF files of all parts in 1:43 and 1:87, colour lists, readme and renders. The OpenSCAD source file is not included.
Disclaimer: Carrera, Carrera GO!!!, Carrera Hybrid and Sturmkind DR!FT are trademarks of their respective owners. This model is independent decoration and has no connection to the trademark owners; the names only describe the matching scale and purpose. The set is a free replica of typical track equipment, not a licensed product of any manufacturer. Not a toy – contains small parts, not for children under 3. Licence: private use only; reselling or sharing the files and selling printed parts is not permitted.
