Elegoo CC2 Canvas Bypass NO EXTRA PARTS

This is a Canvas Bypass that does not need any additional parts or pieces, no fittings, no bolts, no cutting PTFE, no assembly, no nothing. Print and install right off the bed.

This can only be installed with the top hat off and I recommend using the lower spool holders, for a shallower angle of entry into the bypass. 

The tolerances, especially on the top hole for the PTFE tube, are tight, please ensure your printer and filament are dialled in nicely. 

Print laying flat on the bed for strength, orientation should be set correctly in the files already. 

There's 4 different models available, you only need one of them.

This is only compatible with the standard CC2, not with the emoji-edition.

 Print with a 0.4mm nozzle, 3 walls.

Based on a 3D-Scan for a proper fit (scanned with the Elegoo M1 Ultra)

 ----------------------------

Which file to print:
Front vs Back:
Depends on which side of the Canvas you want to install the bypass on.
When standing in front of the pinter the model labelled FRONT is on your side, the model BACK is behind the Canvas

Foam vs No Foam:
The foam model needs some 1.5-2mm thick adhesive foam on the surface that touches the printer. This is to protect the printers paint. See reference image where to put the foam. (do not use double-sided-adhesive-foam-tape!)
If you don't have adhesive foam on hand print the “no foam” model, it's a tighter fit, ready to install without needing any modification.

 ----------------------------

Total workflow for installing the Bypass:
- Power off the printer
- Unplug the Canvas
- Release one PTFE tube from the Canvas
- Press PTFE tube into top hole of the Bypass
- Clip the Bypass onto the printer and slide it into place, so that the Canvas holds it in place nicely

Having a look at the Centauri Wiki how to print TPU will explain the rest
https://wiki.elegoo.com/centauri-carbon-2-combo/how-to-print-tpu