1 / 6
Swaying Pleated Orchid Planter (planter + drip tray) – Planter a Day #006 — zdjęcie 1
1 / 6

Swaying Pleated Orchid Planter (planter + drip tray) – Planter a Day #006

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Generative swaying pleated orchid planter, 182 mm. Free STL + ready Bambu A1 3MF, prints without supports.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Daily generative planter #006. Comes with an 8 mm drainage hole and a matching drip tray generated for its exact footprint.

Style: superformula + ribs texture + asymmetric + s-curve axis, 135° twist. Size: 182 mm tall, 104 mm at the widest point, base Ø 92 mm.

Any slicer: 3 walls, 6 bottom layers, 0% infill and 0 top layers (no spiral vase). A ready Bambu Lab A1 3MF is included (~2h33min and 105 g of PLA on a Bambu Lab A1 (0.4 nozzle)).

Print tips:

  • Pot and drip tray are on the same plate in the 3MF (also as separate STLs)

  • The pot prints hollow from the solid model: 3 walls, 6 bottom layers, 0% infill, no top layers

  • Raised ribs in the tray keep the pot above the drained water

  • PETG recommended for water and sun; PLA works indoors

  • Water drains through the bottom hole into the tray; empty the tray if water sits for long.

About this design: generated procedurally by my own Python code (parametric geometry and growth / reaction-diffusion / noise simulations). No generative AI was used. Images are 3D renders (Blender) of the exact downloadable model.

Tagi