Cloud Amphora Bowl Planter (planter + drip tray) – Planter a Day #015
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generative cloud amphora bowl planter, 62 mm. Free STL + ready Bambu A1 3MF, prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Daily generative planter #015. Comes with an 8 mm drainage hole and a matching drip tray generated for its exact footprint.
Style: low bowl, circle + organic texture. Size: 62 mm tall, 123 mm at the widest point, base Ø 83 mm.
Any slicer: 3 walls, 6 bottom layers, 0% infill and 0 top layers (no spiral vase). A ready Bambu Lab A1 3MF is included (~1h14min and 70 g of PLA on a Bambu Lab A1 (0.4 nozzle)).
Print tips:
Pot and drip tray are on the same plate in the 3MF (also as separate STLs)
The pot prints hollow from the solid model: 3 walls, 6 bottom layers, 0% infill, no top layers
Raised ribs in the tray keep the pot above the drained water
PETG recommended for water and sun; PLA works indoors
Water drains through the bottom hole into the tray; empty the tray if water sits for long.
About this design: generated procedurally by my own Python code (parametric geometry and growth / reaction-diffusion / noise simulations). No generative AI was used. Images are 3D renders (Blender) of the exact downloadable model.