1 / 2
Rotating Stand for Femobook A2 Pietro Mode (Duerlis & Lebrew) — zdjęcie 1
1 / 2

Rotating Stand for Femobook A2 Pietro Mode (Duerlis & Lebrew)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An easier way to rotate the grinder, using 608 bearings

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

I found myself rotating the grinder a lot in the stand in order to get the beans to feed consistently, and this rotating stand makes it a lot easier. It uses 5 608 bearings. Print the stand, 4 of the top caps, and one bottom cap (which has a ridge).

I printed it with 6 bottom layers (so the foot is solid), 3 perimeters and 30% cubic infill, using PETG, but other settings will probably work just as well.

Don't expect perfectly centered rotations, the weight of the A2 is not distributed evenly.

Tagi