1 / 2
Employees Only Sign: stop sign style, raised 2-colour letters — zdjęcie 1
1 / 2

Employees Only Sign: stop sign style, raised 2-colour letters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10 inch stop-sign style door sign with raised white letters and border. Only one colour change, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

An Employees Only sign in a stop sign shape, so it actually gets noticed instead of blending in like a plain rectangle.

It's 10 inches across the flats with rounded corners like a real stop sign. The white border and the EMPLOYEES ONLY letters stand up 1.6 mm off the red, so they catch the light and are easy to read from across the room.

Printing

  • No supports.

  • Red base, white border and letters. Everything white sits on top of the red, so there's only one colour change (at 4.2 mm). One purge, barely any waste.

  • About 4 hours and 150 g. I used PETG, but PLA works fine for indoors.

  • 3 walls and 15% infill. Don't go lower or the big red face can sag.

  • Filament 1 red, filament 2 white in the 3MF.

No multi-colour printer? Print the "one piece" file in red and add a pause or filament change at 4.2 mm. Swap to white when it stops and let it finish.

Hanging it

The back is flat (it's the side on the bed). Clean the door and use 3 or 4 strips of double-sided foam mounting tape. There are no screw holes.

Size

  • 254 mm (10 in) across the flats, 273 mm corner to corner

  • 5.6 mm thick: 4 mm red plus 1.6 mm raised white

  • Letters are Franklin Gothic Demi Cond, 31 mm tall

Designed in Fusion 360.

Tagi