Einhell Power X-Change Twincharger Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount for Einhell Power X-Change A simple, sturdy wall holder for the Einhell Power X-Change Twincharger
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Wall Mount for Einhell Power X-Change Twincharger
A simple, sturdy wall holder for the Einhell Power X-Change Twincharger. It keeps the charger off your workbench and securely on the wall, with the vents left free for airflow.
Features
Hook-style mount: The charger’s rear recess slides onto the angled holder and sits securely.
Open design: The large cutout lets the red housing and its vent slots stay visible and unobstructed, so there’s no heat buildup while charging.
Compact: Only a slim 3D-printed plate and hook, so the charger sits close to the wall.
Two mounting holes: The plate is fixed with two countersunk screws (about 4 mm shaft diameter).
Cable routing: The power cable hangs down freely, and the charging slots stay accessible from the front.
Notes
This holder is made specifically for the Einhell Twincharger. Other Power X-Change chargers may have a different rear shape.
Check that the charger sits securely before leaving batteries on it.
Screws and plugs are not included. Choose them to match your wall (drywall, masonry, etc.).
This is not an official Einhell product and is not affiliated with Einhell.
