Round interlocking self-watering planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two piece self-watering planter. 100mm diameter. Prints in two pieces which fit together.
- Ocena
- 4 / 5
- Polubienia
- 104
- Pobrania
- 685
- Wydruki
- 5
- Wyświetlenia
- 4618
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a two piece self-watering planter. 100mm diameter.
Prints in two pieces which fit together.
Inner piece holds the plant and soil.
Outer piece holds the water.
Test for water-proofness before putting on something which could be damaged.
Designed in Fusion 360 - inspired by Tileable Self Watering Planter by Yamill on Thingiverse https://www.thingiverse.com/thing:3175416
Print instructions
No supports required
Print inner piece with small section on bed - use a brim for stability if required (prints without brim on a Prusa Mk3)
0.2mm Layer height 200um (0.3 mm if you use a 0.6 nozzle)
PLA
5% Infill
5 perimeters on the outer piece for waterproofing
Use the colour change option in Slic3R to make stripes :-)