Logan ebike brake hydraulic-brake replacement-part carbon-fiber-nylon custom-design bicycle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An original custom-designed replacement brake pad prototype for Logan hydraulic bicycle brakes. Designed from scratch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An original custom-designed replacement brake pad prototype for Logan hydraulic bicycle brakes.
Designed from scratch using CAD and test-printed in carbon-fiber-reinforced nylon.
- Custom original CAD design
- Designed for Logan hydraulic brake components
- Carbon-fiber nylon prototype tested for fit
- Custom geometry based on the original brake pad design
Important safety notice: This is an experimental 3D-printed brake component. Material strength and fit testing do not establish braking performance or heat resistance. Not certified for riding or resale as a functional brake pad but i encourage testing with stronger filament its for ebikes why not
The layer hight i used for my k2 plus was 0.2mm
Gyroid infill pattern
90% to 100% infill density
No Supports print backing plate down break pad facing up its simple really
You can print it in PLA for show but do not use or test it, with any material weaker then nylon carbonfiber it will melt and its only 2g each to test
I love reading comments too and upgrading so just let me know what I should do next ideas are great and I appreciate innovative ones 💯 💯 💯