1 / 1
Hand Held Mechanical Grippers — zdjęcie 1

Hand Held Mechanical Grippers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extend your arm's reach!

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Pinch!

A mechanical gripper that uses the power of gear ratio to increase your gripping power!~

This 2:1 ratio hand extender allows you to increase your arms length and and push the limits of human grip strength!!! (for legal reasons this is a joke :D)

Assembly

First you need to prepare 2 M5 screws that has a length of less than 14mm, one M5 nut and a spring from a dead pen. Then print every part in the STEP files folder with the clawpart model needing 2 of them.

First start with the body model and the handle model.

Put the spring in first then combine the 2 parts

Then slide in the transfer2 model and screw it on

Make sure the transfer2 can still move freely

.

.

.

Next place in the 2 grippers onto the stubs and make sure that they are aligned!~

.

.

.

Lastly, place in the transfer spur gear model and screw in so it's connected to the transfer2 model with the M5 nut and you're done! make sure it's still a bit loose so it can actually move around!~

.

.

.

.

.

.

.

.

K that's all! Cya!~