1 / 8
Adjustable Headlight Mount for Wonderfold Wagon (LuxPro Mini Puck Light) — zdjęcie 1
1 / 8

Adjustable Headlight Mount for Wonderfold Wagon (LuxPro Mini Puck Light)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-on, tool-free headlights for Wonderfold wagons. Tilts up and down in 15° clicks, and works on either side.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Snap-on headlight mounts for the Wonderfold wagon’s oval leg rails, sized for the LuxPro battery-operated mini puck lights (31 mm × 17 mm).

Features

  • Snaps onto the wagon’s oval rail (40.7 × 21 mm). No tools, no adhesive.

  • A 24-tooth rosette joint tilts the light up or down in 15° steps.

  • Reversible: the same parts work on the left and right legs, with the light facing forward.

  • Three snap fingers hold the puck. Press it in from the back, and pop it out to change batteries.

  • The cup sits clear of the wagon frame, so it won’t rub or rattle.

Hardware (per light)

  • 1× M3 × 16 socket head cap screw

  • 1× M3 hex nut

Print settings

  • Material: PETG recommended. The clip needs to flex, and PLA may crack.

  • Layer height: 0.16–0.2 mm

  • Walls: 3–4

  • Infill: 30%+

  • Supports: none

Print orientation

  • Rail clip: flat on its oval base

  • Puck cup: front bezel down

  • Knob: flat side down, head pocket facing the bed

Assembly

  1. Press the screw head into the knob’s pocket with a drop of CA glue, and let it set.

  2. Snap the clip onto the wagon’s leg rail.

  3. Drop the M3 nut into the slot at the top of the inner prong. It falls into a hex seat.

  4. Spread the outer prong slightly and slide the cup’s toothed blade between the prongs.

  5. Insert the screw and turn the knob until it’s snug. Loosen it to re-aim.

  6. Push the LuxPro puck into the cup from the back until it clicks.

Notes

  • Designed and tested on a Wonderfold wagon. Measure your rail before printing if you have a different model.

  • Don’t overtighten the M3 screw. Snug is enough to lock the teeth.

Tagi