Poly Controller with smaller frets (90%), brass inserts and battery mount (Wireless)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved upon Josh's original design. It has smaller frets (90%), MX style switch support and strap mounts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It keeps the angular, open-frame body of Josh Designs’ Poly controller and builds on the Whammy Edition with changes to the frets, neck, and hardware.
We made the five frets 10% smaller and spaced them 10% closer together for a shorter reach. Each fret now uses a two-piece cap and stem designed for TTC low-profile MX-style switches. We also smoothed the underside of the neck, added two strap mounts, and replaced captured nuts at the serviceable joints with M3 brass heat-set inserts for repeated disassembly. A four-screw rear hatch gives the whammy spring clearance and lets you reach it without splitting the guitar body.
See the PDF assembly guide for instructions on where and how to install the brass heat-set inserts.
Design credits