Norwex Mop Swivel Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sister in law broke her expensive Norwex mop. The little swivel piece that connects the mod head to the handle…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 264
- Wydruki
- 0
- Wyświetlenia
- 1154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My sister in law broke her expensive Norwex mop. The little swivel piece that connects the mod head to the handle cracked. 3D printer to the rescue. Took some measurements from the broken part and created the replacement with Fusion 360. Made a few prototypes to get the fit and flex right since the original part is injection molded.
Included the Fusion360 file incase you need to make adjustments.
Print Settings
Printer:
DBot
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3 layer, 3 walls, 5 top and bottom.
Infill:
50%
Filament:
Spoolworks EDGE
red
Notes:
Strongly suggest printing in PETG or ABS since this part transfers all the force from the handle to mop head and will be exposed to chemical water.
You can use supports if you want for the little circles that poke out from the sides, but they really aren't needed.It's a small part, so if cooling is an issue, print two of them to give the plastic more time to cool.
Category: Replacement Parts