1 / 6
INBXX Filament Guide and PTFE Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clamp that will firmly hold the Filament guide you print for your INBXX onto the PFTE tube.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I have found issues with the INBXX setup when feeding filament. The Filament guide doesn't stay on the pfte tube and the ptfe tube is easily pushed out of the ptfe mount. Rather than printing a new ptfe mount with fittings i figured a smaller and simpler solution would work best for me.
This clamp uses the M3x6 bolts and M3 nuts i had left over from the INBXX hardware kit. The clamp holds the filament guide you print for your INBXX and clamps it to the ptfe tube.