MeanWell SE-200-24 Power Supply Case Vslot DBot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a vSlot mount for my MeanWell SE-200-24 PSU (50x115mm) and couldn't find one that fit exactly, I also wanted…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed a vSlot mount for my MeanWell SE-200-24 PSU (50x115mm) and couldn't find one that fit exactly, I also wanted one that covered the terminals, and had room for a switch plug, so I found a design I liked and redid it first in Tinkercad and then in Fusion 360 to match my PSU size. There are two sets of mount holes for securing the PSU incase you want more clearance inside.
I've included the Fusion source files and a version in STEP format so you can modify it yourself to fit your particular PSU.
Tinkercad version: https://www.tinkercad.com/things/1xLznKzWyqn
The case has cutouts for an IEC fuse/switch/outlet, and a USB power port plug used in boats and RVs that has a Voltmeter display.
2x M5 10mm bolts and washers for the V slot tabs to mount it.
6x M4 10mm bolts and washers to secure the PSU
2x M3 10mm bolts to secure the IEC box
IEC Outlet: http://tinyurl.com/ycx7xttq
USB Power Plugs: http://tinyurl.com/yczzflpq
MeanWell SE-200-34: http://tinyurl.com/ybgm8mdb
Print Settings
Printer:
Wilson TS
Rafts:
No
Supports:
No
Resolution:
0.3 layer height, 0.6 nozzle, 2 walls, 3 top/bottom
Infill:
10% Cubic
Notes:
Printed in AMZ3D Red PLA, 1mm brim, 50c bed, 205c nozzle, 60mm/s. Took about 8 hours.
Screw hole prep
Drill out the M5 and M4 holes and tap the M3 holes.
Category: 3D Printer Parts