AMZ3D 608 Bearing Spool Hub V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized version of http://www.thingiverse.com/thing:2334107 Created with Customizer!…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Customized version of http://www.thingiverse.com/thing:2334107
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2334107
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.26 layer height, 0.4 nozzle, 2 walls
Notes:
There will be very little flexibility on the vanes, but it should fit snugly into the AMZ3D spool hole and the 608 bearing should be snug as well. If it's too loose or too tight, try reprinting scaled up or down 1%.
Using the following options:
centerBoreDia = 22.3
maxDia = 33
layerHeight = 0.26
vaneWidth = 3
seatWidth = 2
centerExtrusion = 0
seatHeight = 4
rimHeight = 4
vaneCount = 7
addSeat = yes
rimAngularWidth = 90
rimWidth = 3
extrusionWidth = 0.4
filletRadiusScale = 1.4
maxVaneAngle = 115
resolution = 360
vaneHeight = 10
Category: 3D Printer Accessories