624ZZ GT2 Toothed Idler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer!…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Customized version of http://www.thingiverse.com/thing:16627
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627
Idler sleeve for 624zz bearing (13mm outer diameter).
26 teeth, GT2 2mm pitch profile, 6mm wide belt.
Print Settings
Printer:
Wilson TS
Rafts:
No
Supports:
No
Resolution:
0.26 layer height, 0.4 nozzle
Infill:
Concentric
Notes:
Print outer perimeters very slow to prevent rapid shaking and to get a good tooth profile. 10-15mm/s
Using the following options:
additional_tooth_depth = 0
pulley_t_ht = 6.24
nut_shaft_distance = 0
nut_angle = 90
teeth = 26
m3_nut_depth = 0
pulley_b_ht = 1
no_of_nuts = 0
m3_dia = 0
idler = 1
motor_shaft = 13.2
m3_nut_hex = 0
additional_tooth_width = 0.2
retainer_ht = .78
idler_ht = .78
profile = 12
pulley_b_dia = 0
retainer = 1
m3_nut_flats = 0
Category: 3D Printer Parts