1 / 4
Monster Can Holder tipover preventioh — zdjęcie 1
1 / 4

Monster Can Holder tipover preventioh

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a can holder designed to minimize the risk of tipping over 0.5l/16oz cans.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

!!!The model may not scale properly. It should be 18cm in diameter.!!!

It is a really simple model. the .stl model may seem broken, but just check if your slicer could slice it properly. You can either use the Cone design, or the low profile holder

For both models:
Print time: About 2-3hrs
Filament in use: With PLA 100g at 8% infill

The model may not scale properly. It should be 18cm in diameter.

I hope it helps.

Tagi