1 / 2
Propagation Station for 3 Test Tubes - Plant Cuttings Stand — zdjęcie 1
1 / 2

Propagation Station for 3 Test Tubes - Plant Cuttings Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for 3 test tubes to root plant cuttings, tilted 10 degrees.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Block holding 3 test tubes (20 mm) at a 10 degree outward tilt, so cuttings stay stable on the windowsill. 124x44x34 mm, holes 21.8 mm, 26 mm deep. Measure your own tubes first. Prints flat, no supports. Print: PLA, 0.2 mm, 3 walls, 15% infill, about 4-6 h. Honest note: AI-assisted design (CAD script), not physically test-printed yet. Deutsch: Vermehrungsstation fuer 3 Reagenzglaeser (20 mm), Glaeser vorher messen.

Tagi