Tiva C series Launchpad Clamshell REV. 1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is for a Texas Instruments Tiva C series Launchpad, and was modeled off of the EK-TM4C123GXL.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This case is for a Texas Instruments Tiva C series Launchpad, and was modeled off of the EK-TM4C123GXL.
Print Settings
Printer:
Flux Delta
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
5%
Notes:
I used such a low resolution with a low infill due to printing it in a translucent PLA, in order to see the board inside. The pin (button pass-through) needs to be printed 3 times along with 3 pin caps.
Clam shell
Due to the printable hinge, the base walls need to be gently spread in order to get the top half to mate with the bottom half.
Pin Assembly
For the assembly of the pins, I've been placing the pin up through the holes in the upper half of the clamshell and super gluing the pin caps on top.
Category: Hobby