SK120 120W Bench Power Supply Enclosure | DC & USB-C PD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact 3D-printed enclosure for the SK120 bench power supply, with USB-C PD and DC inputs and a rear input selector.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact, 3D-printable enclosure for building a 120W bench power supply around the SK120 module. The angled display is easy to read on a workbench, and the front-facing banana binding posts keep the output connections within reach.
The enclosure has space for two rear power inputs: a DC jack and a USB-C PD trigger. A three-position switch on the back lets you select DC, USB-C, or OFF. The case has ventilation openings, and the lettering prints separately so you can give it a contrasting color.
Parts used in this build
SK120 adjustable power supply module
USB-C PD trigger module
DC input jack
Three-position selector switch (DC / OFF / USB-C)
Two banana binding posts
Hookup wire and mounting hardware
Printing and assembly
I printed the enclosure body with a 0.4 mm nozzle and the separate lettering with a 0.2 mm nozzle. The letters fit into matching recesses and can be secured with a small drop of super glue.
Check the dimensions of your DC jack, USB-C PD trigger, and switch against the openings before printing, since these parts come in different sizes.
Build and testing
My build cost under $25 and reached 122W in a load test using the DC input. With the USB-C PD setup used in the video, I reached about 65W.
Wiring diagram:

Parts links:
https://www.aliexpress.com/item/1005007279317333.html
https://www.aliexpress.com/item/1005013246072580.html
https://www.aliexpress.com/item/1005007036942425.html
https://www.aliexpress.com/item/1005004871632514.html
https://www.aliexpress.com/item/1005005988853903.html
Designed in Fusion 360 for the JABALI workbench.