Mantel Stocking Hooks - 3 Sizes, Screw Mount, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas mantel stocking hooks in S/M/L. Prints on its side for strength. Teardrop screw holes, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang stockings on the mantel without buying a matched set of store hooks. Each hook has a wide curved arm with a bulb tip so a filled stocking will not slip off, a flat back plate, and two countersunk screw holes with teardrop tops so it prints on its side with no supports.
Sizes
S: about 62 x 72 x 22 mm, 55 mm reach — kids' stockings and light decor
M: about 76 x 87 x 26 mm, 70 mm reach — standard stockings
L: about 90 x 102 x 30 mm, 85 mm reach — oversized / heavily filled stockings
Design
Printed on its side so layer lines run along the arm for strength
Teardrop screw holes for #6 / 3.5 mm wood screws, countersunk
Flat wall face, no supports needed as oriented
Print settings
PETG recommended for strength near a warm fireplace; PLA is fine for decor use away from heat
Print on its side as oriented, 0.2 mm layers, 3-4 walls, 30-40% infill, no supports
About 21-51 g each (estimated)
Mount into the mantel or a stud with wood screws. These have not been print-tested yet — if the arm flexes more than you like on a very heavy stocking, print the next size up or add a second wall loop.
If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.
About the images
All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors and props are shown for illustration. Real print photos will be added as Makes come in.
