1 / 5
Bumper for MEUS Goldrush V2 (72mm width, maybe also V1) — zdjęcie 1
1 / 5

Bumper for MEUS Goldrush V2 (72mm width, maybe also V1)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalistic bumper for the 1:10 MEUS Goldrush V2 which fits directly on the rails.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Minimalist bumper for the 1:10 MEUS Goldrush V2 which fits directly on the rails (72mm width). The first 2 holes in the rails are used to tighten it and the screws hide into the bumper.

The hole in the front is to fasten a elastic strap or something similar. The whole bumper is not really lighter than the original one but it will not catch rocks like the original does.
Bonus points: When you carry the car like a handbag it will not cut your fingers like the aluminum thing from MEUS ;)

As usual, the FreeCAD file is attached too so you can modify it by yourself.

Tagi