1 / 2
SeeLevel Tank Monitor Bezel — zdjęcie 1
1 / 2

SeeLevel Tank Monitor Bezel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bezel to mount the SeeLevel tank monitor to your wall, while also covering the hole for your old monitor.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

My camper came with a traditional POS holding tank monitor that was always wrong. The SeeLevel system is supposed to be a lot more accurate, and the sensors won't foul. There were other SeeLevel monitor bezels on Thingiverse already, but none of them were big enough to cover the existing hole left by the old tank monitor system - so I put this together to do that. It's large enough to cover most old tank monitor holes. It surface mounts to the wall, but the SeeLevel wiring and harness still needs the (old) hole behind it to accommodate the wires. The monitor panel has 4 screw holes. This bezel has 5 screw holes - one of which can be used to screw the bezel to the wall without the SeeLevel monitor panel in place. When you screw the monitor panel through the remaining 4 holes, the 5th hole will be covered by the lip of the panel (hidden).

The photo of my install has a power cord coming out the side - that supports a digital thermometer I have mounted adjacent to the tank sensor. It also has a slot on the side that supports a mounting arm for the thermometer. Since most people who are looking for models here won't have my same setup (with thermometer), the model I've loaded here does not include the slots for the power cord or thermometer mounting arm (so what you print won't be exactly as you see in my photo, but it's suitable to give you an idea of what it looks like after installation).

Category: Other

Tagi