1 / 9
Circuit Helper - Electronics Tray and Grippers — zdjęcie 1
1 / 9

Circuit Helper - Electronics Tray and Grippers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A super versatile and modular gripper tray for easy soldering and electronics component holding!

Ocena
0 / 5
Polubienia
37
Pobrania
51
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Update - I have added a quarter sized tray into the print files now!

The Circuit Helper is a super versatile and modular grid style tray with individual threaded posts and adjustable clamps.

The posts feature threaded nuts that screw up and down the length, with "finger" inserts in between them that can clamp around wires, pcb's and other components for soldering.

The threaded nut system means that it is completely height adjustable and remains level with other posts and components - no more trying to bend and flex arms and alligator clips into the right position.

The posts themselves can be rotated in the tray grid, with the finger clamps sliding down a groove to keep them aligned. The small tab on the inside of the finger ring can be cut off if you required it to spin 360 degrees.

The design includes:
- a grid-style tray (200mm x 200mm).
- 2 x post variants (50mm + 100mm H).
- 3 x finger clamp variants (short + long + wide) - more variants might be added in the future.
- 95A TPU foot inserts to prevent the tray from sliding.

Tagi