Exo-Gear Accessory Pack 1 (Twist-lock Mag, Laser Mount, PET bottle Adapter and Barrel Extension) for O.S. Bomba / OSGear B-daman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Twist-lock Magazine, Laser Mount, PET bottle Adapter and Barrel Extension for your O.S. Bomba toy (or OSGEAR B-daman)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Four accessories to enhance your Exo-Gear equipped O.S. Bomba marble launcher!
Twist-Lock Magazine:
Increases your Bomba's inbuilt ammo capacity by approximately 2.... and it also adds a twist-lock port so that you can attach various other accessories/extensions to it. (Got permission from Revoct to remix his stuff for my nefarious needs 😛. He'd doesn't have all his wacky magazine add-ons uploaded to Printables yet, so check out his Thingiverse profile for the rest of 'em.
Comes in two versions:
Bomba ver. will only work with O.S. Bomba. It installs directly into the O.S. Bomba, and lets you use O.S. Bomba w/ a larger magazine and Exo-Gear without needing to remove the antenna.
Exo ver. will attach directly to Exo-Gear. (also works with B-Daman OSGEAR.) I got permission to resurface Zee's OSGEAR magazine to create this.
PET bottle Adapter / Funnel:
Attaches via a Twist-Lock Barrel. It can either act like a funnel and make it easier to load marbles or you can screw in a standard PET drink bottle(ie: 2L coke bottle) to massively increase your marble capacity. The threads are based off Leotoy's design (the rest is based off the PI-EX P70's Pet adapter/funnel)
Bipod Barrel Extension:
Plugs unto a O.S. Bomba Barrel (or OSGEAR B-daman Barrel) to extend it. It also adds two legs pegs to the front and ad a OSGEAR compatible Scope/Sight Port. Also included is some "Barrel Feet" that you can plug into said leg pegs, though you can just use O.S. Bomba feet if you want 🤣.
O.S. Laser Mount:
Lets you attach a laser pointer to your O.S. Bomba/B-daman (via a Barrel Extension) via plastic cable ties.
Has a cleverly placed bump that'll press the on-button when you rotate the Laser Pointer.
There are 3 variants of this mount to accommodate for 3 different Laser pointers. Hopefully at least one of 'em will work for ya. (See images to learn about laser pointer compatibility)
Link to AliExpress Laser Pointer: https://www.aliexpress.us/item/3256809816459737.html
Print Instructions:
there are two .3MF's included in case you are feeling lazy.
One .3mf for Bambu studio + p1p printer + PETG,
One .3mf for Snapmaker Orca + Snapmaker U1 printer + PETG
Else, you should probably use the STL files and manually configure the settings.
Enable supports
Use "Normal" Supports unless the file notes tell you to use "Tree" supports
STL's should already be in optimal orientation
Assembly Instructions:
Adding a Laser to the Laser Mount:
Insert cable tie into each of small rectangular holes. You'll wanna loop it over the Laser-pointer holding area, and attach it to the other end of the cable tie
Start zipping it tighter, once the loop is small enough, You can place the Laser-pointer to the correct spot and finish zipping up the cable tie. Cut off excess cable tie and you're done!
Attaching Exo Twist-Lock Magazine + Barrel Extension + Laser Mount + PET Funnel
(Note: The O.S. Bomba + Exo-Gear + Short-Barrel should already be preassembled)
First, you'll wanna pop off the antenna. Then you'll be able to slide the Exo Twist-Lock Magazine's T shaped peg into the slot at the top of the Exo-Gear on the rear side.
Install the Funnel by placing the two parts together, then rotating it clockwise to get the two parts to lock together.
Next you can install Feet onto the Barrel extension if you want, then just insert the Barrel Extension into the Short Barrel.
At this point you can now just slide the the Laser+Mount into the score/sight that's on the Barrel Extension.
Special Instructions for using the Bomba Twist-Lock Magazine
The O.S.B. Twist-Lock Magazine installs just like Mini Mag, so check up on those instructions, then come back here.
The real tricky part is getting the O.S. Bomba + Twist-lock-Mag to fit into the Exo-Gear. It needs to go in at an angle, and you'll need to press the trigger in while try to shove it in. You might need to shave the down the supported region of the Bomba Twist-lock Mag to help with the fit. Alternatively You can remove the Trigger, Head-key, Head-upper, fit the O.S. Bomba into the Exo-Gear, then reinstall said parts.

After that, just finish the Exo-Gear installation and add what ever accessories you want.
ALT PARTS + STP Notes:
The no-Lock Barrel and Extension are about the same as the normal versions, but have no locking mechanisms. They'll play nicer with OSGEAR P-16 long barrel 2.
Barrel2_V5B is about the same as the normal, just slightly different styling
STP Parts are not oriented in optimal orientation for printing. STP Parts were exported from Rhino3d and might have some errors. Hopefully it's easier to modify than STL files!