1 / 2
BETAFPV NexRadio 14 Gimbal Protector — zdjęcie 1
1 / 2

BETAFPV NexRadio 14 Gimbal Protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gimbal and toggles protector for the BETAFPV NexRadio 14

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
1
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Use the BLANK models to customise your logo. You can also choose "stock" (Ø 12mm) or "wide" (Ø 17.5mm)

Thank you David and Eden from BETAFPV.

Recommended Materials

TPU 85-95A

PETG can be tried, but I doubt it would be nice.

Print Settings

  • Printer: Bambu Lab P1S

  • Filament material: TPU 85-95A

  • Layer height: Default or finer

  • Wall Ordering: Outside to Inside

  • Supports: Yes, Tree Hybrid

  • Infill: 15-50%

  • Infill Pattern: Hexagonal/Tri-Hexagonal/Gyroid

  • Nozzle Temp: 210-235°C

  • Bed Temp: 40-60°C

  • Travel Speed: 200-500mm/s

  • Acceleration: 4000-10000mm/s²

  • Rafts: Doesn't Matter

  • Notes: Make sure the build plate is clean and free of oil, debris and other contaminants to achieve successful first-layer adhesion.

I'll try to make a model for SLS and MJF printers as well. That will hopefully extend the protection to the shoulder toggles.

Please report any inaccuracies or general suggestions via Printables DM. 

Tagi