MEOW POCKET – Cat Food Pouch Holder for Fridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A removable snap-on fridge pocket that keeps opened wet cat food pouches upright.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Standard Digital File License
A 3D printed fridge organizer for half-used wet cat food pouches. MEOW POCKET keeps pouches upright, easy to find and together in one place. The cat-shaped pocket lifts off its mounting rail for cleaning.
Why MEOW POCKET?
Removable snap-on pocket: detach it for cleaning, then fit it back onto the rail.
Adhesive mounting: attach the rail with double-sided tape; no drilling or screws.
Made for cat food pouches: a dedicated spot in the refrigerator for partially used pouches.
Cute and practical: cat ears, a smiling face and a decorative Voronoi-style pattern.
FDM printable: the photographed prototype was printed in matte PLA.
Download includes
Original 3MF project with the parts arranged and saved print settings.
Separate STL files: pocket (print 1), mounting rail (print 1) and small latch (print 2).
Dimensions
Pocket: 101 × 37 × 94.7 mm.
Mounting rail: 105.4 × 8 × 30 mm.
Small latch: 11.5 × 7 × 30 mm; print two as shown in the 3MF project.
Before use
Double-sided mounting tape is not included. Use tape suitable for the refrigerator surface and operating conditions, and follow the tape manufacturer’s application instructions.
The holder is not airtight. Follow the food manufacturer’s storage and refrigeration instructions on the pouch. The holder stores pouches; do not place food directly in it.
Hand-wash with cool or lukewarm water. PLA parts are not dishwasher-safe.
A little home for your cat’s favorite food — designed by ClearSwing 3D / cuplcompg.
Saved settings in the included 3MF
Related project: MEOW DISPENSER

Process: FDM / FFF.
Material: PLA; the photographed prototype uses matte PLA.
Nozzle: 0.4 mm.
Layer height: 0.20 mm; initial layer: 0.20 mm.
Walls: 2.
Infill: 15%, gyroid.
Top layers: 5; bottom layers: 3.
Supports: disabled in the saved project.
Brim: automatic in the saved project.
The saved profile is for an Anycubic Kobra S1; it is not a tested Bambu printer profile. Select your own printer and filament profile before slicing; use the 3MF layout as a reference for the parts and their orientation. Separate STLs are supplied for other slicers.
Parts and assembly
Print one pocket, one mounting rail and two small latches, as arranged in the 3MF.
Fit the mounting parts as shown in the project.
Attach the rail to a clean, dry refrigerator surface using suitable double-sided tape. Follow the tape manufacturer’s instructions.
Fit the pocket onto the rail. Lift it off when cleaning, then reinstall it.
Check the fit of the printed mounting parts before installation. Print settings and dimensional tolerances may need adjustment for your printer.
Shorts demo — See how MEOW POCKET stores an opened pouch in the fridge. Watch the full Short with sound.