Creepy Baby Buddha
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There can never be to many Buddha remixes! Models: Creepy_Baby_Buddha_01 Is the original remix. The mesh has a number…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 799
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
There can never be to many Buddha remixes!
Models:
Creepy_Baby_Buddha_01
Is the original remix. The mesh has a number imperfections and my be difficult to slice with some slicers. Works fine with Cura.
Creepy_Baby_Buddha_02
Has bean cleaned up using Meshmixer so it should now work with less forgiving slicers liks Simplify3D. However, this process inevitably results in a slight loss of fine detail, therefor I would recommend attempting to slice 01 version first and only if it fails use the 02 version.
PRINTING DIRECTIONS:
I haven't printed it myself yet but as with "Creepy Baby Bust" i would suggest that rather than printing the model in its upright position, tilted it backward 40-45 degrees so as to get the best results around the face by reducing the overhang on the chin, brow etc. Doing so will require more support structures though.
Category: Sculptures